NEC NDA-24298 manual Ovft

AOPR : Assignment of Outgoing Pattern Routing Data

3. Data Entry Instructions

OPR

Enter OPR assigned by the AFRS command.

RA

Enter the trunk route seizure order.

RT

Enter the external trunk route number which is seized in the RA. The B-channel/voice channel route number should be entered in the case of ISDN/CCIS interface.

E

0 = Route advance ends (Last route)

1 = -

SKIP

Enter the number of digits to be skipped from dialed numbers.

TIME OF	OUTGOING	ORDER OF	ROUTE	OUTSIDE				NUMBER			PATTERN	OVERFLOW	PRIORITY
DAY	ROUTE	ROUTE	ADVANCING	ROUTE					OF		NUMBER	TONE	RESTRICTION
CHANGE	SELECTION ADVANCING		END	NUMBER				SKIPPED			LOCATION	(OVFT)	CLASS
PATTERN	PATTERN	(RA)	INDICATION		(RT)			DIGITS			(PNL)	0/1	(PRSC) REMARKS
(TDPTN)	NUMBER	0-7	(E)					(SKIP)			0-999			0-15
0-7	(OPR)		0/1						0-24
	0-4000
0	1	0	1	0		0	1	0		2	1	0	0		0
0	1	1	0	0		0	1	0		2	1	0	0		0

TDPTN

Enter data with a range from 0 to 7 if the Time Pattern assignment is required by the ATCP command, or the Clocked Manual Override data assigned by

the ACMO command. Different TDPTN data can be assigned to a single OPR.

OVFT

0 = Overflow Tone is not provided

1 = Overflow Tone is provided

PRSC

0 = LCR-Controlled Alternate PRSC service is not required 1-15 = The restriction class referred by the AEFR command.

PNL

Enter data with a range from 1 to 999 if the digit addition is required by the AADC command. Otherwise, enter 0. A maximum of 4 digits of DC can be added when the PNL is assigned with a range from 1 to 127, and a maximum of 24 digits of DC can be added when the PNL data with a range from 128 to 999.

NDA-24298CHAPTER 4

Page 309

Issue 1