NEC NDA-24298 manual Aand Assignment of Automatic Number Identification Data

AAND : Assignment of Automatic Number Identification Data

AAND: Assignment of Automatic Number Identification Data

1.General

This command assigns ANI data for the number of digits of the calling station number and the office code on each route basis for the Automatic Number Identification (ANI) Service. (For E911 ANI)

2.Precautions

The route number set in parameter RT should have been designated in ARTD, ANI = 1.

3.Data Entry Instructions

AT

0 = STA outgoing

1 = ATT outgoing

CC

0 = Main Central

1 = Satellite Central

KT

0 = OFF 1 = ON

OUT-	STA/ATT	MAIN/	EXPAN-	CENTRAL	STA	OFFICE	CALL
			SION				ORIGINA-
						CODE
GOING	OUTGOING	SATELLITE	OF STA	OFFICE	NUMBER		TOR DIGIT
						TO BE		OFFICE CODE (DC)
ROUTE	(AT)	CENTRAL	NUMBER	CODE	LENGTH		TO BE
						ADDED		MAX. 10 DIGITS
NUMBER	0/1	(CC)	LENGTH	(COC)	(STNL)		SKIPPED
						(ADD)
(RT)		0/1	(KT)	MAX.	1-8		(SKIP)
						1-10
			0/1	5 DIGITS			0-10

These parameters vary depending on the assignment of the previous parameter.

CHAPTER 4 NDA-24298

Page 774

Issue 1