NEC NDA-24298 manual Acnpn Assignment of Calling Number Pattern for NDM

ACNPN : Assignment of Calling Number Pattern for NDM

ACNPN: Assignment of Calling Number Pattern for NDM

1.General

This command assigns the Calling Number Pattern (CNP) to the route which is used for the SID To Network- Present service/for the Calling Party Recognition service. The data assigned by this command is written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).

2.Precautions

1.Enter a B-Channel Logical Route Number in the LGRT parameter.

2.The CNP parameter in this command corresponds to the one assigned by ACNDN command.

3.Assign the Calling Number Pattern (CNP) to Incoming Call and Outgoing Call each.

4.When the Calling Party Recognition is used in TAPI service, this command is to be assigned to the incoming route of COT which receives the calling number information from Central Office (analog) directly.

5.This command must be used in a pair with ACNDN command.

3.Data Entry Instructions

IC/OG

I = Incoming Call (Calling Party Recognition) O = Outgoing Call (SID To Network-Present)

KIND OF	LOGICAL ROUTE
CONNECTION	NUMBER
(IC/OG)	(LGRT)
I/O

CNP

Enter the arbitrary number within the range between 1 and 1023.

CALLING NUMBER

PATTERNREMARKS (CNP)

1-1023

LGRT

Enter the logical route number of the B-channel

NDA-24298CHAPTER 4

Page 813

Issue 1