NEC NDA-24298 manual Asidt Assignment of Special Incoming Telephone Number

ASID_T : Assignment of Special Incoming – Telephone Number

ASID_T : Assignment of Special Incoming – Telephone Number

1.General

This command is used to assign the destination of a call from the station which belongs to the special group, such as Off Hook Alarm, Attendant Night Transfer, Priority Call, Do Not Disturb, and Room Cut Off services. The station data of ASID can be assigned by using Telephone Number.

2.Precautions

1.Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the ALGSL command is not available in this command.

2.In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in node can be used in this command. Also, when logging in to the NCN, the data memory of the whole nodes in the network is to be written.

3.The applicable stations to achieve the above service features are categorized as Special Group. The stations belong to the Special Group are assigned by the ASGD/ASGD_T command.

4.The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8.

5.Do not enter S/A=A (Attendant Console), when F=3 (Attendant Night Transfer) is entered.

6.The GN parameter should correspond to the one assigned by the ASGD/ASGD_T command.

NDA-24298CHAPTER 4

Page 735

Issue 1