NEC NDA-24298 manual This data is necessary at all nodes. Assign, Self FPC at the terminating node

ASYDL : Assignment of System Data into Local DM (LDM)

	SYSTEM			BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)		DATA
	INDEX				SYSTEM DATA CONTENTS
TYPE		00 - FF
	(INDEX)		DATA
(SYS)		(Hex)
	512 - 1535			BIT
			0/1

	b0	Fusion Point Code (FPC) of the node providing ATT-
	b1
		CON.
	b2	Assign FPC of a terminating node for operator calls
640	b3	from other nodes and Ring Down (IC) calls from
		PSTN.
	b4
		FPC: 1-253 (01 Hex-FD Hex)
	b5
	b6	Note:	This data is necessary at all nodes. Assign
			the self FPC at the terminating node.
	b7
		Designation of output numbers for SMDR ICS
		format.
	b0	0/1 = Physical (station) number/Telephone number
		Note:	This data is valid when the text format of
1
			SMDR is “ICS format,” and the number of
			digits for Telephone number is 6 or less.
		Designation of output numbers for MCI ICS format.
		0/1=Physical (station) number/Telephone number
641	b1	Note:	This data is valid when the text format of
			MCI is “ICS format,” and the number of
			digits for Telephone number is 6 or less.
0	b2	Not used
		Designation of output routes for SMDR ICS format.
	b3	0/1 = Physical route/Logical route
		Note:	This data is valid when the text format of
			SMDR is “ICS format.”
0	b4~b7	Not used

CHAPTER 4 NDA-24298

Page 182

Issue 1