NEC NDA-24298 manual Aizpn Assignment of Internal Zone Paging Data for NDM

AIZPN : Assignment of Internal Zone Paging Data for NDM

AIZPN: Assignment of Internal Zone Paging Data for NDM

1.General

This command is used to assign Internal Zone Paging group data in Fusion Network. The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).

2.Precautions

1.Each Internal Zone Paging group must be composed of Dterm station (TEC=12).

2.A maximum of 255 Internal Zone Paging groups can be assigned in one Fusion Network.

3.A maximum of 24 stations can be assigned to one Internal Zone Paging group.

4.One Dterm station can be assigned to multiple Internal Zone Paging group.

5.It is not available to arrange the member stations of an Internal Zone Paging group stretching over multiple Nodes.

3.Data Entry Instructions

NIZPG

Enter the Internal Zone Paging group code in the Fusion Network with a range from 1 to 255. Note

TELN

Enter the Telephone Number of the member stations within Internal Zone Paging Group.

NETWORK
INTERNAL		TELEPHONE NUMBER
ZONE PAGING	UGN		REMARKS
		(TELN)
GROUP ID
		MAX. 16 DIGITS
(NIZPG)
1-255
	1
	1

UGN

Fixed to “1.”

Note: The number of digit for Internal Zone Paging group ID is determined by the ASYDL/N SYS1, INDEX804, b3 0/1: 2 digits/3 digits.

NDA-24298CHAPTER 4

Page 495

Issue 1