NEC NDA-24298 manual Call can be transferred

ASTD : Assignment of State Translation Data

Table 4-3 List for Assignment of ASTD (Continued)

STM		STS			ST
					* = standard settings
	0	Trunk Release	0	Station (Calling Party Release)
			1	Trunk	Note 1
1	1
	2
	3
	4
		* = standard settings
	Note 2: One setting applies to five items. (STM=0, STS 0)
	0	Three-way calling with COT included	0	Restricted
			1*	Allowed
	1	Three-way calling with COT included in Execu-	0	Restricted
		tive Right of Way service
			1*	Allowed
	2	Outgoing call to a C.O. Line or a Tie Line after	0	Restricted
		holding the COT
			1*	Allowed
	3	Outgoing call to a C.O. Line after holding a sta-	0	Restricted
		tion or a Tie Line
			1*	Allowed
2
			0	Restricted
		Processing for calling a fully-restricted station
	4			Allowed
		after holding the COT	1*
				Note:	The call can be transferred.
		Processing in which ATT overrides to the con-	0*	Warning tone is sent out to both the station and
		nection between the COT and a station (Busy		the ATT
	5
		Verification) and then the Busy Verification
			1	Warning tone is sent out to the station, ATT, and
		Warning Tone is sent out periodically		C.O. side.
	6	Step call when a Tie Line incoming call encoun-	0	Allowed
		ters busy
			1	Restricted
4	0	Remote Access to PBX/Automated Attendant	0	Not provided
			1*	In service
	0	DAY/NIGHT mode changeover system	0	Not used.
			1*	Fixed to “1”.
6	1		0*
	2		0*
	3		0*

Note 1: Valid when C.O. line has a release signal. (Standard Setting is “1”.)

CHAPTER 4 NDA-24298

Page 204

Issue 1