NEC NDA-24298 manual Select, DP/PB Onsg

ARTDN : Assignment of Route Class Data for NDM

4. Data Sheet

									LGRT		REMARKS
									1-899
FUNCTION
		Signal Interface for Outgoing								Note:	The select
		0	=	CCIS No.7		1	=	RingDown			signal in
		2	=	Second Dial Tone		3	=	Not used			ONSG should
1	OSGS	4	=	Sender (Immediate Start)					Note		be “DP.”
		5	=	Not used
		6	=	Sender (Delay Dial Start)
		7	=	Sender (Wink start)		8-15=		Not used
		Signal Selection for Outgoing
		0 =		Not used	1	=	DP, 10 pps, 33% Make
		2 =		PB, 60 msec. Interruption or CCIS No.7
		3 =		DP/PB	4	=	MF
2	ONSG	5 =		DP, 20 pps, 33% Make
		6 =		Not used
		7 =		DP, 20 pps, 50% Make
		8 =		PB, 120 msec. Interruption
		9 =		DP, 10 pps, 40% Make
		10 =		MFC	11-15=Not used
		Signal Interface for Incoming								Note:	The select
		0	=	CCIS No.7			1	=	Ring Down		signal in
		2	=	Second Dial Tone			3	=	Not used		INSG should
3	ISGS	4	=	Sender (Immediate Start)					Note		be “DP.”
		5	=	Not used
		6	=	Sender (Delay Dial Start)
		7	=	Sender (Wink Start)			8-15=		Not used
		Signal Selection for Incoming
		0	=	Not used 1= DP, 10 pps, 33% Make
		2	=	PB, 60 msec. Interruption or CCIS No.7
		3	=	DP/PB			4 =		MF
4	INSG	5	=	DP, 20 pps, 33% Make
		6	=	Not used
		7	=	DP, 20 pps, 50% Make
		8	=	PB, 120 msec. Interruption
		9	=	DP, 10 pps, 40% Make
		10 =		MFC			11-15=Not used
		Type of Trunk Function
		0	=	Not used
5	TF	1	=	Outgoing Trunk (OGT)
		2	=	Incoming Trunk (ICT)
		3	=	Bothway Trunk (BWT)

CHAPTER 4 NDA-24298

Page 536

Issue 1