NEC NDA-24298 manual Aaed Assignment of Announcement Equipment Data

AAED : Assignment of Announcement Equipment Data

AAED: Assignment of Announcement Equipment Data

1.General

This command assigns the trunk information related to Announcement Equipment on a tenant basis. For the Hotel system, it is also possible to assign Language Class when Language Service of Property Management System (PMS) is provided.

2.Precautions

1.The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. If data for this command is common for all tenants (ASYD command, SYS1, INDEX 93, bit7=1), assign TN parameter as data “1” for all tenants.

2.EQP parameter designates the kind of service feature provided by the announcement trunk.

In the Hotel system, the relationship between the EQP number and the kind of service feature can be arranged by the AHSY command.

3.Parameter LANG appears in the Hotel system to provide “Language Service” (SYS1, INDEX 161, b2 = 1 in the ASYD command.)

4.The data “0 (Common)” of the LANG parameter means that the guest will listen the Common message from the announcement equipment if the guest does not register the language information through PMS.

5.The R parameter specifies whether the Ring Back Tone (RBT) is provided prior to sending the message or not.

6.When a trunk incoming call is connected to the announcement, whether the answer signal is sent out or not is specified by the A parameter.

7.When data “0 (Single connection)” is assigned in the M parameter, the trunk number assignment (TK) may not be required. The alternative trunk routing within a route is automatically executed.

8.When the announcement equipment is to be used as a general announcement trunk, data “0” must be assigned for parameters C, R, A and M.

9.The route number (RT) and trunk number (TK) of the announcement trunk are assigned by the ATRK command.

NDA-24298CHAPTER 4

Page 615

Issue 1