NEC NDA-24298 manual Ardn Assignment of Remote Control Day/Night

ARDN : Assignment of Remote Control Day/Night

ARDN: Assignment of Remote Control Day/Night

1.General

This command assigns the data related to the Centralized Day/Night Mode Change service feature.

2.Precautions

1.This command is used only at the Main office which controls the Day/Night mode for the satellite office via the CCIS link.

2.When there are multiple satellite offices created by grouping tenant numbers, the mode can be changed on all the satellite offices or on a per tenant basis.

3.For the Main office, the related indexes of the ASYD command are as follows:

SYS1, INDEX18, bit6 (Day/Night change of satellite office) 0/1 = Out/In service

SYS1, INDEX75, bit0 (ARSC command Day/Night table) 0/1 = common/separate

SYS1, INDEX75, bit1 (ASFC command Day/Night table) 0/1 = common/separate

SYS1, INDEX75, bit2 (ATNR command Day/Night table) 0/1 = common/separate

SYS1, INDEX75, bit3 (ATDP command Day/Night table) 0/1 = common/separate

SYS1, INDEX75, bit4 (AEFR command Day/Night table) 0/1 = common/separate

For the Satellite office, the related indexes of the ASYD command are as follows:

SYS1, INDEX18, bit7 (Day/Night change is executed by the Main Office) 0/1 = Out/In service SYS1, INDEX19, bit0-3 (Tenant (TN=1-15) of the main office to which the satellite office belongs) SYS1, INDEX75, bit0 (ARSC command Day/Night table) 0/1 = common/separate

SYS1, INDEX75, bit1 (ASFC command Day/Night table) 0/1 = common/separate

SYS1, INDEX75, bit2 (ATNR command Day/Night table) 0/1 = common/separate

SYS1, INDEX75, bit3 (ATDP command Day/Night table) 0/1 = common/separate

SYS1, INDEX75, bit4 (AEFR command Day/Night table) 0/1 = common/separate

NDA-24298CHAPTER 4

Page 805

Issue 1