NEC NDA-24298 manual Aospl Assignment of Outgoing Selection Pattern for LDM

AOSPL : Assignment of Outgoing Selection Pattern for LDM

AOSPL: Assignment of Outgoing Selection Pattern for LDM

1.General

This command assigns skip and additional digits information for Outgoing Selection Translation Pattern Number (PNO). This data is written in Local Data Memory (LDM).

2.Precautions

1.Before using this command, make sure that an Outgoing Selection Translation Pattern Number (PNO) has been assigned in the ASTPL command.

2.The transmit number translation of the OGC/OGCA method outgoing calls are done by ASTPL/AOSPL command. Since the additional number and skip digits can be assigned by the AOPRL/AADCL command for LCR/LCRS method, the ASTPL/AOSPL command may not be required.

3.Data Entry Instructions

PNO

Enter the PNO assigned by the ASTPL command.

ADD

Enter the number of digits to be entered in DC parameter. If SKIP=0, ADD must be assigned to 1-4.

OUTGOING SELECTION	NUMBER OF DIGITS NUMBER OF ADDITIONAL		ADDITIONAL DIGIT INFORMATION
TRANSLATION PATTERN NUMBER	SKIPPED	DIGITS	(DC)
(PNO)	(SKIP)	(ADD)
			MAXIMUM 4 DIGITS
1-15	0-24	0-4

SKIP

Enter desired skip digits if required

DC

Enter desired additonal numbers within 4 digits.

NDA-24298CHAPTER 4

Page 291

Issue 1