NEC NDA-24298 manual FKY = 28 Answer

AKYD_T : Assignment of Key Data for Dterm – Telephone Number

12.The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8.

13.There is no default key data provided for Dterm (8-button type). The key data for all the line/feature buttons must be programmed. When assigning the key data of the line/feature button, take the following precautions:

(a)My Line Key must be assigned in KYN = 1-8, and KYN = 9-16 should be assigned KYI = 0 (Not used).

(b)The following function keys are basically fixed:

FKY = 13: CONF (Three-Way Calling)

FKY = 18: TRANSFER (Call Transfer-All Calls)

FKY = 20: HOLD (Non-Exclusive Hold/Exclusive Hold)

FKY = 28: ANSWER

FKY = 51: MIC

FKY = 52: SPEAKER

FKY = 57: RECALL

(c)Not used line/feature buttons should be assigned KYI = 0 (Not used).

14.There is no default key data provided for Dterm (24-button type/32-button type). The key data for all of the line/feature buttons must be programmed. When assigning the key data of the line/feature button, take the following precautions:

(a)My Line Key must be assigned in KYN = 1-24, and KYN = 25-40 should be assigned KYI = 0 (Not used).

My Line in KYN = 17-24 cannot be assigned without assigning any Line Key or any Function Key in KYN = 1-16.

(b)The following function keys are basically fixed.

FKY = 13: CONF (Three-Way Calling)

FKY = 18: TRANSFER (Call Transfer-All Calls)

FKY = 20: HOLD (Non-Exclusive Hold/Exclusive Hold)

FKY = 28: ANSWER

FKY = 51: MIC

FKY = 52: SPEAKER

FKY = 57: RECALL

(c)Not used line/feature buttons should be assigned KYI = 0 (Not used).

15.When using 16 ELCJ (SR 3295, PROG-B or later), the FKY = 49: Speed Calling-One Touch can be assigned to a maximum of 16 Key Numbers (KYNS).

Note 1: Speed Calling-One Touch data can be saved by the BOSD command.

Note 2: Assign the data to the Key Numbers (KYN) in the consecutive order.

NDA-24298CHAPTER 4

Page 455

Issue 1