NEC NDA-24298 manual Ahlsn Assignment of Hot Line Station for NDM

AHLSN : Assignment of Hot Line Station for NDM

AHLSN: Assignment of Hot Line Station for NDM

1.General

This command assigns the data related to the Hot Line service feature. The data assigned by this command is written in the Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).

2.Precautions

1.Prior to assigning this command, the Hot Line station should be given the TEC = 14 (Hot Line class) using the ASDT command. Additionally, TEC = 13 (Data Terminal via Dterm) and TEC = 18 (Virtual Line Appearance) can also apply the Hot Line service.

2.If you want to delete the station that applied Hot Line service, delete the Hot Line data using this command prior to deleting the station number using the ASDT command.

3.When the Hot Line destination is the outside party, assign the Abbreviation Digit Code (ADC) of the speed calling number using the ASPD command.

3. Data Entry Instructions

TYPE

1 = Station

2 = Outside Party (ADC)

3 = Trunk Line

CON UGN

Enter CON UGN dates when TYPE = 1/2

CON LGRT/TK

Enter CON LGRT/TK data when TYPE = 3 (Trunk Line)

HOTLINE	HOTLINE		DESTINATION	DESTINATION	SPEED	OPPOSITE
		CONNECTION			CALLING	PARTY’S	TRUNK
USER	TELEPHONE	TYPE	STATION’S	TELEPHONE	CODE	LOGICAL
GROUP	NUMBER		USRE GROUP	NUMBER			NUMBER
		(TYPE)			(ADC)	ROUTE
NUMBER	(HOT TELN)		NUMBER	(CON TELN)			(CON TK)
		1-3			MAX.	NUMBER
(HOT UGN)	MAX. 16 DIGITS		(CON UGN)	MAX. 16 DIGITS
					4 DIGITS	(CON LGRT)
1
1
HOT UGN					ADC

Fixed “1”.		CON TELN	Enter ADC when TYPE = 2 (Outside party). The ADC
	When TYPE = 1, enter the connected		should be assigned by the ASPD command.
	party’s telephone number.

NDA-24298CHAPTER 4

Page 501

Issue 1