NEC NDA-24298 manual Aarpl Assignment of Area Code Restriction for LDM

AARPL : Assignment of Area Code Restriction for LDM

AARPL: Assignment of Area Code Restriction for LDM

1.General

This command assigns the area/office code of Toll Restriction - 3/6 digits for Fusion service in conjunction with ATDPL (for LDM)/ATDPN (for NDM) command. This data is written in Local Data Memory (LDM). When common data is needed in the Fusion Network, assign the data by the AARPN command.

2.Precautions

1.This command is used when restriction data is assigned to RES E 2 (Toll Restriction is required) in the ARSCN (NDM) command or in the ARRCN command.

3.Data Entry Instructions

OG-LGRTAssign a unique LGRT No. in the Fusion network.

FLAG

Select either 3 Digits or 6 Digits check box.

RES

0 = Area/Office code is restricted.

1 = Area/Office code is allowed.

OUTGOING	ROUTE
LOGICAL		FLAG OF 3 OR	DESTINATION	RESTRICTION
	RESTRICTION
ROUTE		6 DIGITS	(AREA/OFFICE)	DATA
	CLASS				REMARKS
NUMBER		(FLAG)	CODE (DC)	(RES)
	(RSC)
(OG-LGRT)		3 Digits/6 Digits	MAX. 6 DIGITS	0/1
	0-15
1-899

RSC

RSC assigned by the ARSCN command.

DC

DC should not include the access code.

Note: In case the data has already been assigned when “Get” button is executed after checking “6 Digits” parameter and entering DC E 000000, “Del” button is not valid while “Set” button is to be effective. Then the Restriction data can be changed (overwritten) by “Set” button.

CHAPTER 4 NDA-24298

Page 386

Issue 1