NEC NDA-24298 manual Business System Command Descriptions and Data Sheets

BUSINESS SYSTEM COMMAND DESCRIPTIONS AND DATA SHEETS

		Command name		The assigned data dump into the designated file by the
				list up command shown here.
				Command name (full name)
			List Up: LFDD
		AFDD
	AFDD: Assignment of Function Display Data			The purpose of the command and its service
1. GENERAL				features are explained here.

This command is used to assign the characters of software key indication on a D term Series E.

When this command is not assigned, the default(which shows on FKY parameter description on this command) are displayed.

2. PRECAUTIONS

The LCD is 24 digits wide, and there are four of software keys, hence a maximum of 6 characters can be assigned for each software key indication.

3.DATA ENTRY INSTRUCTIONS

DISP

Displayed characters (Max.6 characters of alphabet and numbers)

FUNCTION KEY CODE (FKY)1-320	DISPLAY MESSAGE ON LCD (DISP)
1	FWD-BY

FKY(1-320)Note:The default displayed characters are shown in the parenthesis

FKY	Service name	Default display
1	Call Forwarding-Busy Line	FDB
2	Call Forwarding-All Calls	FDA
3	Executive Right of Way	BV
4	Call Waiting	CW
5	CAll Back	CB
6	-	-
7	Save and Repeat	S&R
		-

FKY	Service name	Default display
60	Manual Signaling Key	SIG
61-82	-	-
83	Retain Conference	KEEP
84	Serial Call	S_CAL
85	Internal Zone Paging(Not released	IZP
	for U.S.A.and Canada)
86	-	-
87	Wake Up Set	WUS

Information necessary to create the office data which may include the following:

The related command and parameters

The related service feature

MAT operation instructions

The system hardware operation affecting the data The data storage node within the fusion network

The required parameters, the applicable data range and parameter descriptions are explained here.

Figure 4-1 Command Descriptions

CHAPTER 4 NDA-24298

Page 56

Issue 1