NEC NDA-24298 manual ASLU2 Assignment of Slumber Time Data

ASLU2 : Assignment of Slumber Time Data 2

ASLU2: Assignment of Slumber Time Data 2

1.General

This command assigns the data related to the Slumber Time - Do Not Disturb service feature.

2.Precautions

1.The slumber time period and the forwarded destination are assigned by this command. A maximum of four (4) different time periods can be assigned as the Slumber Time.

2.The G parameter corresponds to the one assigned by the ASLU1 command. The station numbers belonging to the slumber group are assigned by the ASLU1 command.

3.Denial of the Slumber Time - Do Not Disturb service feature can be assigned by the following commands:

(a)ARTD command, SLOV = 1 is assigned for trunk route or

(b)ASFC command SFI = 107, RES = 1 is assigned for the class of the originating station.

4.The AAED command should also be assigned if TFR = 2 (DAT card) is assigned.

5.Time data should be assigned as 24 hours a day (military time).

6.When making multiple time data assignments for a specific Slumber Time Group, the time data assigned must not be duplicated.

7.If the slumber service is required 24 hours a day, enter the same time data into the both parameters, FROM HOUR/FROM MINUTE and TO HOUR/TO MINUTE.

NDA-24298CHAPTER 4

Page 753

Issue 1