NEC NDA-24298 manual Necessary digits, the calling party receives reorder tone

ASYD : Assignment of System Data

	SYSTEM	DATA		BIT
SYSTEM			CORRESPONDING
	DATA	(DATA)
DATA				DATA
	INDEX	00 – FF				SYSTEM DATA CONTENTS
TYPE
(SYS)	(INDEX)	(Hex)	DATA
	0 – 511				BIT
			0/1
						For Remote Access to System, is Forced Account (F/A) Code
					b0	Dialing required upon receiving RBT?
						0/1 = Required/Not Required
			0		b1	Not used
						Send SST after ACC Code dialing for Authorization Code or F/A
					b2	code is dialed using LCR Access
						0/1 = Out/In Service
			0		b3	Not used
					b4	ATT Re-enters Loop on Serial Call
	43					0/1 = Restriction/Allowed
						Send DT to the distant Office upon receiving Terminated Office
					b5	Code (Tandem)
						0/1 = Not Required/Required
			0		b6	Not used
1
						Restriction for Dialing more than the max. of necessary digits (as
						assigned via command AMND)
					b7	0/1 = Not Required/Required
						Note: If a calling party dials more than the maximum
						necessary digits, the calling party receives reorder tone.
					b0	Automatic Circuit Assurance
						0/1 = Out/In Service
			0		b1
			0		b2
	44		0		b3
			0		b4	Not used
			0		b5
			0		b6
			0		b7

NDA-24298CHAPTER 4

Page 79

Issue 1