NEC NDA-24298 manual Actkc Assignment of Connection Trunk Data for LDM

ACTKC : Assignment of Connection Trunk Data for LDM

ACTKC: Assignment of Connection Trunk Data for LDM

1.General

This command assigns and deletes the connection trunk data for B-channel/D-channel route by designating the range of trunk numbers and LENS.

2.Precautions

1. This command can be used only when the PBX and the MAT are connected in on-line state.

3. Data Entry Instruction

C_RT

The route assigned for B-channel and D-channel.

STEP

Specify the interval between the consecutive connection trunk numbers to be assigned/deleted.

Ex. C_TK (START)=1, STEP=3 is entered, connection trunk number is assigned/deleted as follows;

[1, 4, 7, 10, 13, 16, ......]

LEVEL

Enter the first/last level number.

CONNECTION	CONNECTION		COUNT	CONNECTION		GROUP	LEVEL	COUNT
ROUTE	TRUNK NUMBER		UP	EQUIPMENT		NUMBER	NUMBER	UP
NUMBER	(C_TK)		STEP	NUMBER		(GROUP)	(LEVEL)	TYPE	STATUS
(C_RT)	1-4095		(STEP)	(C_LENS)		0-31	0-7	(TYPE)
1-1023	START	END	1-10	START	END	START END	START END	1-6

C_TK

The connection trunk controlled by the connection route. Enter the range of trunk numbers to be assigned/deleted.

C_LENS

LENS of the trunk for B- channel and D-channel.

GROUP

Enter the first/last group number.

TYPE

This parameter determines how to arrange the trunk data. Refer to the next pages for more detail explanation.

1: LEVEL →		GROUP →		UNIT
2: LEVEL →		UNIT	→	GROUP
3: GROUP →		UNIT	→	LEVEL
4: GROUP →		LEVEL →		UNIT
5: UNIT	→	LEVEL →		GROUP
6: UNIT	→	GROUP →		LEVEL

Note 1: When “Delete” is selected in “KIND” box, the data for “C_RT”, “C_TK” and “STEP” is required.

Note 2: When the assignment/deletion is successful, “OK” displays in “STATUS” grid. Otherwise, related error message is provided.

NDA-24298CHAPTER 4

Page 867

Issue 1