NEC NDA-24298 manual Teln, Rcv

ACFS_T : Assignment of Call Forwarding Station Data – Telephone Number

ACFS_T : Assignment of Call Forwarding Station Data – Telephone Number

1.General

This command is used to set the Call Forwarding - All Calls/Busy Line/Don’t Answer, and further the Split Call Forwarding Services for each station. The station data of ACFS command can be assigned by using Telephone Number instead.

2.Precautions

1.Only the Telephone Numbers assigned by the ALGSN command can be used. Telephone Numbers by the ALGSL command is not available in this command.

2.In case logging in to a LN, only the Telephone Numbers allocated to the stations within the logged-in node can be used in this command. Also, when logging in to the NCN, the data memory of the whole nodes in the network is to be written.

3.The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8.

4.The “RCV” parameter can be assigned when ASYD, SYS1, INDEX79, b2=1 (Split Call Forwarding is In Service), and “Split Call Forwarding” is selected in “TYPE” parameter.

3.Data Entry Instructions

TELN

Enter the Telephone Number of the station to which this service is to be assigned.

CFD

Enter the call forwarding destination number within 24 digits.

		CALL	KIND OF	CALL	CALL FORWARDING
	TELEPHONE NUMBER				DESTINATION
		FORWARDING	RECEIVED FORWARDING
UGN	(TELN)				NUMBER
		TYPE	CALL	KIND
	Max. 16 digits				(CFD)
		(TYPE)	(RCV)	(SRV)
					Max. 24 digits

TYPE

Select the type of Call Forwarding.

•Call Forwarding

•Split Call Forwarding

RCV

When "Type = Split Call Forwarding" is entered, select the kind of received call.

•Trunk

•Telephone Number

SRV

Select the kind of Call Forwarding.

•All Calls

•Busy Line

•Don't Answer

•PS Incoming Incomplete

Note: The existing data is readout by pressing “Get” button after UGN and TELN is entered.

NDA-24298CHAPTER 4

Page 743

Issue 1