NEC NDA-24298 manual This data is effective when Tmprt =

ARTI : Assignment of Trunk Application Data

CDN

ROUTE NUMBER

TRUNK DATA

Call restriction while Tie Line is backed up on ISDN.

0= No restriction

1= Speech call restriction (Speech. 3.1 kHz audio, 7

20	DVRST			kHz audio calls are restricted)
		2	=	Data call restriction (Unrestricted digital, restricted
				digital and Video data are restricted.)
		3	=	Both Speech and Data calls are restricted.
		Call restricted by Temporary Route Information
21	RSCT	0	=		No restriction	1	=	Restriction
		Note:			This data is effective when TMPRT = 1.
		Outgoing Call Account by Temporary Route Information
22	ROCG	0	=		Not used	1	=	Effective
		Note:			This data is effective when TMPRT = 1.
		Incoming Call Account by Temporary Route Information
23	RICG	0	=		Not used	1	=	Effective
		Note:			This data is effective when TMPRT = 1.
		Status Inquiry Message Send
24	STSENQ	0	=		Out of service
		1	=		In service
25	MMNPASS	When assigning this data, always enter zero (0).							0	0	0	0
26	DLTK	(Japan only)							0	0	0	0
		When assigning this data, always enter zero (0).
27	CALN	(Japan only)							0	0	0	0
		When assigning this data, always enter zero (0).
28	NETINT	(Japan only)							0	0	0	0
		When assigning this data, always enter zero (0).
29	INBAND	When assigning this data, always enter zero (0).							0	0	0	0
		(Australia only)
		Return Massage for Connect ISDN LINE with Analog
30	RETMSG	Trunk
		0	=		CALL PROC. + ALERT
		1	=		CALL PROC. + ALERT or CALL PROC. +
					PROGRESS

Timing to demand ANI Information

		0	= There is no ANI demand at Incoming call
		1	=	After receiving 1st digit
		2	= After receiving 2nd digit
31	ANI	3	=	After receiving 3rd digit
		4	=	After receiving 4th digit
		5	=	After receiving 5th digit
		6	=	After receiving 6th digit
		7	=	After receiving 7th digit

CHAPTER 4 NDA-24298

Page 648

Issue 1