NEC NDA-24298 manual Atas Assignment TAS Service Data, Unit

ATAS : Assignment TAS Service Data

ATAS: Assignment TAS Service Data

1.General

This command assigns the data related to the Trunk Answer From Any Station (TAS) service feature.

2.Precautions

1.One tenant can be provided one TAS indicator.

2.The TAS answer access code is assigned by the ASPA command, SRV = SSC, SID = 16.

3.The TAS answering capability is assigned by the ASFC command, SFI=13 and the ACFR command, TSFI = 5.

4.The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. If data for this command is common for all tenants (ASYD command, SYS1, INDEX 93, bit2 = 1), assign TN parameter as data “1” for all tenants.

3.Data Entry Instructions

TN

Enter the tenant number to be applied to the TAS service.

UNIT

Enter the Unit number of the TAS indicator.

TENANT NUMBER	MODULE GROUP	UNIT NUMBER	CIRCUIT NUMBER
(TN)	NUMBER	(UNIT)	(CN)	REMARKS
	(MG)	0-3	0/1

MG

Enter the module Group number the TAS indicator is mounted.

CN

Enter the circuit number of the TAS indicator .

CHAPTER 4 NDA-24298

Page 770

Issue 1