NEC NDA-24298 manual Data Entry Instructions

AAEDN : Assignment of Announcement Equipment Data for NDM

3. Data Entry Instructions

C

0=30 seconds, and then disconnects

1=The connection is held until the calling party released

R
	LGRT
0=Send RBT
1=Do not send RBT	Enter logical route number.

A

0=Answer Signal is not sent 1=Answer Signal is sent

TENANT	ANNOUNCEMENT	DURATION OF	SENDING	ANSWER	MULTIPLE	LOGICAL
				SIGNAL		ROUTE	TRUNK
NUMBER	EQUIPMENT	CONNECTION	RBT		CONNECTION
				SENDING		NUMBER	NUMBER
(TN)	NUMBER	(C)	(R)	(A)	(M)	(LGRT)
	(EQP)0-127	0/1	0/1		0/1		(TK)
				0/1		1-899

EQP

Enter EQP as the service feature provided by DAT.

0=Dead Level Number	Note: The EQP for Hotel system is
1=Unused Number
	changeable by the AHSY command,
2=Remote Access to PBX
	though the default EQP (service name)
3=May be used for other purposes
	are listed here.
4=Outgoing Trunk Busy Announcement
5-6=May be used for other purposes
7=Route Restriction Announcement
8-14=May by used for other purposes

15=Alert Service(for Hotel system) Note

16=Timed Reminder Set Message (for Business system)/ Service Set-up Message (for Hotel system) Note

17=Service Set-up Failure Message (for Hotel system) Note 18=Timed Reminder Cancel Message (for Business system)/

Service Cancel Message (for Hotel Massage) Note

19=Service Cancel Failure Message (for Hotel system)	Note
20=Room Cut-Off Announcement (for Hotel system)	Note
21=Do Not Disturb Announcement (for Hotel system)	Note

22=Timed Reminder/Wake Up Call Message for Announcement Trunk 23-31=Group Announcement (for Hotel system) Note

32=Delay Announcement-Attendant (for U.S.A./Canada only) 33=Not Used

34=Automated Attendant (1st Announcement) 35=Automated Attendant (2nd Announcement)

36=Slumber Time-Do Not Disturb (for Slumber Time Group 1) 37=Slumber Time-Do Not Disturb (for Slumber Time Group 2) 38=Slumber Time-Do Not Disturb (for Slumber Time Group 3) 39=Slumber Time-Do Not Disturb (for Slumber Time Group 4) 40=Slumber Time-Do Not Disturb (for Slumber Time Group 5) 41=Slumber Time-Do Not Disturb (for Slumber Time Group 6) 42=Slumber Time-Do Not Disturb (for Slumber Time Group 7)

43-48=Not Used

49-53=Delay Announcement Attendant (1st Announcement)

54-58=Delay Announcement Attendant (2nd Announcement)

59-121=Not Used

122-125=Multiple Announcement

126-127=Not used

M

0=Single connection 1=Multiple connection

TK

Enter TK data.

Note: This parameter appears if M=1 is entered.

CHAPTER 4 NDA-24298

Page 622

Issue 1