Lincoln Electric 200 38TROUBLESHOOTING & REPAIRF-38, Figure F.13 Blower Paddle Mark Location

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

F-38TROUBLESHOOTING & REPAIRF-38

ENGINE THROTTLE ADJUSTMENT TEST (CONTINUED)

(PERKINS ONLY)

FIGURE F.13 - BLOWER PADDLE MARK LOCATION

BLOWER

PADDLE

MARK

Return to Section TOC

to Section TOC

Return to Master TOC

Return to Master TOC

PROCEDURE

Strobe Tach Method 1. Turn the engine off.

2. Unlatch, lift and secure the right side door. Note: Latches are located at both ends of the

door.

3. Using a white or red marking pencil, place a mark on one of the blower paddles or on the side of the flywheel. See Figure F.13 for loca- tion.

4. Connect the strobe-tach according to the manufacturerʼs instructions.

5.Start the engine and direct the strobe-tach light on the blower paddle. Synchronize it to the rotating mark.

With the machine at HIGH IDLE the tach should read between 1540 and 1650 RPM. With the machine at LOW IDLE the tach should read between 1375 and 1425 RPM.

Return

PIPELINER® 200