![](/images/new-backgrounds/1211940/211940253x1.webp)
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
F-57 TROUBLESHOOTING & REPAIRF-57
MAIN GENERATOR FRAME REMOVAL AND REPLACEMENT PROCEDURE
(CONTINUED)
FIGURE F.24 – BRUSH BRACKET WRAP-AROUND COVER
BRUSH BRACKET
REMOVE (2) NUTS,
WASHERS, AND SCREWS
WRAP- AROUND COVER
27.Using the slot head screw driver, remove the two screws and nuts from the brush bracket
FIGURE F.25 – MAIN GENERATOR BRUSH BRACKET CLAMPING BOLT
CLAMPING BOLT | BRUSHES (8) |
BRUSH BRACKET
28. Lift the eight brushes from the main commu- | 29. Using the 7/16” wrench, loosen (do not |
tator. Note their positions for reassembly. | remove) the main generator brush bracket |
| clamping bolt. Note the position of the drill |
| spot for reassembly. See Figure F.25. |