TOC
TOC
INSTALLATION | ||
TECHNICAL SPECIFICATIONS - PIPELINER® 200D KUBOTA |
| |
Return to Section
Return to Master
Make/Model | Description | Speed (RPM) | |
| 4 | Cylinder |
|
| 4 | Cycle |
|
Kubota | Naturally Aspirated | High Idle 1600 | |
V2203M | Diesel Engine | Low Idle 1400 | |
| Cast Iron Cylinder, | Full Load 1600 | |
| Block/Crankcase |
| |
Displacement | Starting | Capacities | |
134.1 cu. in | System | Fuel: 15 gal | |
12VDC battery | |||
(2.2 ltrs) | (Group 45, 650 | 57 L |
|
Bore x Stroke | cold crank amps) | Oil: 8.0 Qts. | |
1.4 KW Starter | |||
3.43” x 3.64” | 40 A. Alternator | 7.6 | L |
w/ built in reg. | 9.5 | Qts. | |
27.8HP @1600 RPM |
| 9.0 L | |
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
| DESCRIPTION |
| RATED DC OUTPUT |
|
| Duty | DC CURRENT RANGE |
|
|
|
|
| |||||
|
|
| VOLTS @ RATED AMPS |
|
| CYCLE | Fine Adjustments in each Range |
|
| 200 Amp DC Welder |
| LINCOLN PLUS RATING 40V @ 200A |
|
| 60% |
| |
| All Copper Windings |
| NEMA RATING 28V @ 200A |
|
|
| ||
| Pure DC Power Generator |
|
|
|
|
|
|
|
|
|
| Auxiliary Power (1) |
|
| |||
|
|
|
|
| ||||
|
|
| 1.75 kW 15 Amps @ 120V DC @ 35% Duty Cycle |
|
| |||
|
|
| PHYSICAL DIMENSIONS |
|
| |||
|
|
|
|
| ||||
| HEIGHT |
| WIDTH | DEPTH | WEIGHT | |||
| 45.50(2) in. |
| 24.00 in. | 68.00 in. | 1302 lbs. | |||
| (1156 mm) |
| (610 mm) | (1727 mm) | (592 kg) | |||
(1)Output rating in watts is equivalent to
(2)Height is to the top of exhaust elbow. Case height is 40.9 in.(1039mm).
PIPELINER® 200D KUBOTA
