Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
F-58 TROUBLESHOOTING & REPAIRF-58
MAIN GENERATOR FRAME REMOVAL AND REPLACEMENT PROCEDURE
(CONTINUED)
FIGURE F.26 – MAIN GENERATOR FEET MOUNTING
MAIN GENERATOR
FEET (2)
REMOVE MOUNTING
NUTS, WASHERS,
AND BOLTS
30.Using the 3/4” wrench, remove the frame mounting bolts, nuts, and washers from the feet of the main generator. See Figure F.26.
FIGURE F.27 – MAIN GENERATOR ENGINE MOUNTING
SLING
ENGINE / GENERATOR
MOUNTING HOLES
31. With the rope sling around the main genera- | 32. Using the 9/16” wrench, remove the bolts |
tor frame, carefully lift the frame a small dis- | and lock washers mounting the generator |
tance. Slide the wood or steel blocks under | frame to the engine. See Figure F.27. |
the engine. See Figure F.27. |
|
