Safety Instructions

About the freezer.

Not all features are on all models.

Freezer Shelves and Baskets

A shelf above the ice storage bin

A half-width basket

A deep full-width basket with divider

Appearance and features may vary

Operating Instructions

Installation Instructions

Tips

Basket Removal

To remove the deep full-width basket:

Open the freezer drawer until it stops.

Lift the freezer caddy up.

Pull the divider forward until the rear locating tabs are out of the slots. Turn the divider slightly to the side to release the front locating tabs and lift out.

The freezer basket rests on the metal slide brackets and is held in place with swing locks.

Turn the swing locks from verticall to horizontal position.

Open the refrigerator doors.

Lift the basket up and rotate it toward you. Slide out from the side of the drawer.

When replacing the deep full-width basket:

Tilt the basket toward you and lower it into the drawer.

Place the basket onto the metal slide brackets and over the swing locks.

Turn the swing locks from horizontal to vertical position to lock the basket

in place.

Turn the divider slightly to one side so the tabs on the front fit into the vent slots on the basket. Position the divider so the back locating tabs snap into place in the back vent slots.

Lower the freezer caddy ensuring the hook fits over the front edge of the bottom freezer basket. Push down to secure.

Troubleshooting

Tabs

To remove the half-width basket:

Tabs

Pull the basket out to the stop location.

Lift the basket up at the front to release it from the slides.

Lift the back up and out of the slide.

CAUTION:Always be sure to fully close this basket.

When replacing the basket, make sure that the wire tabs and wire hooks on the sides of the basket go into the slots in the top

of the upper basket slides.

Appearance may vary

10

Page 9 Page 11
Page 10
Image 10
GE 200D9366P019 installation instructions About the freezer, Troubleshooting, Freezer Shelves and Baskets, Basket Removal
Page 9 Page 11

200D9366P019 specifications

The GE 200D9366P019 is a sophisticated component primarily recognized for its use in industrial applications, particularly in automation and control systems. This product, developed by General Electric, showcases remarkable features that integrate advanced technology for enhanced performance and reliability.

One of the main features of the GE 200D9366P019 is its robust design, engineered to withstand harsh industrial environments. This durability ensures that the component remains operational even under extreme conditions such as temperature fluctuations, vibration, and dust. This inherent toughness is vital in maintaining system integrity, reducing downtime, and lowering maintenance costs.

The GE 200D9366P019 incorporates cutting-edge technologies that facilitate seamless integration into various systems. The component is designed with compatibility in mind, allowing it to work harmoniously with other GE products and third-party systems. This interoperability is a significant advantage for users looking to expand or upgrade their existing setups.

Another key characteristic of the GE 200D9366P019 is its high level of precision and accuracy. The component is engineered to deliver consistent performance, which is essential in applications requiring exact measurements and control. This precision contributes to superior process management and enhances the overall efficiency of the systems it is integrated into.

The GE 200D9366P019 also features advanced communication capabilities. With support for various communication protocols, this component facilitates real-time data exchange between devices, allowing for improved monitoring and control. This connectivity is crucial in today’s smart manufacturing environments, where integrated systems play a critical role in optimizing workflows and reducing operational costs.

In addition to its technical features, the GE 200D9366P019 is backed by the extensive support and resources offered by General Electric. Users benefit from comprehensive documentation, troubleshooting guides, and customer service, ensuring they can maximize the potential of their investment.

Overall, the GE 200D9366P019 stands out as a reliable and versatile component in the realm of industrial automation. Its robust design, advanced technologies, and precise capabilities make it an ideal choice for businesses seeking to enhance their operational efficiency and maintain high standards of quality.
Top Page Image Contents