Installation Instructions

INSTALLING THE WATER LINE (CONT.)

WHAT YOU WILL NEED (CONT.)

NOTE: The only GE approved plastic tubing is that supplied in GE SmartConnect™ Refrigerator Tubing kits. Do not use any other plastic water supply line because the line is under pressure at all times. Certain types of plastic will crack or rupture with age and cause water damage to your home.

•A GE water supply kit (containing tubing, shut-off valve and fittings listed below) is available at extra cost from your dealer or from Parts and Accessories, 800.626.2002 (in Canada 1.800.661.1616).

•A cold water supply. The water pressure must be between 20 and 120 p.s.i. (1.4–8.1 bar).

•Power drill.

•1/2″ or adjustable wrench.

•Straight and Phillips-blade screwdriver.

•Two 1/4 ″ outer diameter compression nuts and 2 ferrules (sleeves)—to connect the copper tubing to the shut-off valve and the refrigerator water valve.

OR

•If you are using a GE SmartConnect™ Refrigerator Tubing kit, the necessary fittings are preassembled to the tubing.

•If your existing copper water line has a flared fitting at the end, you will need an adapter (available at plumbing supply stores) to connect the water line to the refrigerator OR you can cut off the flared fitting with a tube cutter and then use a compression fitting. Do not cut formed end from GE SmartConnect™ Refrigerator tubing.

•Shut-off valve to connect to the cold water line. The shut-off valve should have a water inlet with a minimum inside diameter of 5/32″ at the point of connection to the COLD WATER LINE. Saddle-type shut-off valves are included in many water supply kits. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes.

Install the shut-off valve on the nearest frequently used drinking water line.

1SHUT OFF THE MAIN WATER SUPPLY

Turn on the nearest faucet long enough to clear the line of water.

2CHOOSE THE VALVE LOCATION

Choose a location for the valve that is easily accessible. It is best to connect into the side of a vertical water pipe. When it is necessary to connect into a horizontal water pipe, make the connection to the top or side, rather than at the bottom, to avoid drawing off any sediment from the water pipe.

3DRILL THE HOLE FOR THE VALVE

Drill a 1/4″ hole in the water pipe (even if using a self-piercing valve), using a sharp bit. Remove any burrs resulting from drilling the hole in the pipe.

Take care not to allow water to drain into the drill.

Failure to drill a 1/4″ hole may result in reduced ice production or smaller cubes.

34

Page 33 Page 35
Page 34
Image 34
GE 200D9366P019 Installing the Water Line, Shut OFF the Main Water Supply, Choose the Valve Location
Page 33 Page 35

200D9366P019 specifications

The GE 200D9366P019 is a sophisticated component primarily recognized for its use in industrial applications, particularly in automation and control systems. This product, developed by General Electric, showcases remarkable features that integrate advanced technology for enhanced performance and reliability.

One of the main features of the GE 200D9366P019 is its robust design, engineered to withstand harsh industrial environments. This durability ensures that the component remains operational even under extreme conditions such as temperature fluctuations, vibration, and dust. This inherent toughness is vital in maintaining system integrity, reducing downtime, and lowering maintenance costs.

The GE 200D9366P019 incorporates cutting-edge technologies that facilitate seamless integration into various systems. The component is designed with compatibility in mind, allowing it to work harmoniously with other GE products and third-party systems. This interoperability is a significant advantage for users looking to expand or upgrade their existing setups.

Another key characteristic of the GE 200D9366P019 is its high level of precision and accuracy. The component is engineered to deliver consistent performance, which is essential in applications requiring exact measurements and control. This precision contributes to superior process management and enhances the overall efficiency of the systems it is integrated into.

The GE 200D9366P019 also features advanced communication capabilities. With support for various communication protocols, this component facilitates real-time data exchange between devices, allowing for improved monitoring and control. This connectivity is crucial in today’s smart manufacturing environments, where integrated systems play a critical role in optimizing workflows and reducing operational costs.

In addition to its technical features, the GE 200D9366P019 is backed by the extensive support and resources offered by General Electric. Users benefit from comprehensive documentation, troubleshooting guides, and customer service, ensuring they can maximize the potential of their investment.

Overall, the GE 200D9366P019 stands out as a reliable and versatile component in the realm of industrial automation. Its robust design, advanced technologies, and precise capabilities make it an ideal choice for businesses seeking to enhance their operational efficiency and maintain high standards of quality.
Top Page Image Contents