WARNING
Remote Control Kit (K924-5) - Contains remote control rheostat and 100 ft.(30.5 m) cable for adjusting the OCV at the welding site. (For Codes 10910 and above.)
Remote Control Kit (K2464-1) - Contains a remote control rheostat (for adjusting the CC “STICK” OCV), remote control potentiometer (for adjusting the CV “WIRE” OCV), and 100ft.(30.5m) cable.
K953-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-1 Fender & Light Kit
K965-1 Cable Rack
K1858-1 AIR CLEANER SERVICE INDICATOR STICK OPTIONS
K704 ACCESSORY SET - Includes 35 ft.(10 m) of electrode cable and 30 ft.(9 m) of work cable, head- shield, work clamp and electrode holder. Cable is rated at 500 amps, 60% duty cycle.
Pipe Thawing with an arc welder can cause fire, explosion, damage to electric wiring or to the arc welder if done improperly. The use of an arc welder for pipe thawing is not approved by the CSA, nor is it recommended or supported by Lincoln Electric.
------------------------------------------------------------------------
Spark Arrestor Kit (K903-1) - Includes a heavy gage steel, approved spark arrestor, clamp and adapter for mounting to the muffler exhaust pipe.
TRAILER (K953-1) - Two-wheeled trailer with optional fender and light package. For highway use, consult applicable feder- al, state, and local laws regarding possible additional require- ments. There is a choice of 2 hitches, a fender & a light pack- age.
C-2
OPTIONAL FEATURES GENERAL OPTIONS
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
| ACCESSORIES | C-2 |
| (Field Installed) | WIRE FEED OPTIONS | volt- |
| | Wire Feed Module (K623-1) - Provides constant |
| | age (CV) output with improved arc stability for |
| | Innershield welding. Excellent for MIG welding. |
| | Recommended wire feeders are the LN-7, LN-23P and |
| |
| | LN-25. (Factory installed on the K1643-6). | |
| | LN-15 Wire Feeder (K1870-1,-2)-Portable CC/CV unit |
| | for flux-cored and MIG welding. | |
| | LN-23P Wire Feeder (K316L-1)-Portable CV unit for |
| | Innershield pipe welding. Control cable operates con- |
| | tactor inside Wire Feed Module for “cold” electrode. |
| | Requires LN-23P Adapter Kit (K350-1) and Gun and |
| | Cable Assembly. | |
| | LN-23P Adapter Kit (K350-1)-Required to adapt LN- |
| | 23P to any Lincoln power source. Makes 14 pin con- |
| | nection at power source. | |
| | Magnum® 250 Innershield Gun (for LN-23P) (K355-10)- |
| | For lighter weight and easier handling. Rated 250 |
| | amps, 60% duty cycle. For .068 through 5/64” (1.7 |
| | through 2.0 mm) Innershield wire and includes |
| | reduced speed switch. For pipewelding, an M11476 |
| | 62° gun tube is recommended. | |
| | LN-25 Wire Feeder (K449)-Portable CC/CV unit for |
| | flux-cored and MIG welding. Includes Gas Solenoid & |
| | Internal Contactor. Requires Wire Feed Module. | |
| | Remote Vol age Control Kit for LN-25 (K444-2) |
| | Provides 25 ft. (7.5m) of remote output voltage control |
| | and output jumper (2 and 4) for machines having 14 |
| | pin MS-type connector. | |
ForMagnum®self-shielded350 Innewireshieldwith Gun15 ft(for. (4.LN5m)-25)(K126cable. -For2)-
.062-3/32” (1.6-2.8mm) wire.
Magnum®15 ft. (4.5m)200cableMIG. ForGun.025(for(0.LN6m)-25)(wireK497. -3)-With
Connects
Magnum200GunMIGCongunectorto LN-KiT25Wire(K466Feeder-1) .
62° gun tube for Pipe Welding (KP1909-1)- Recommended modification for K355-X or K345-X guns with 90° gun tubes. Compatible with K126-1,-2K264-8 and K355-10.
PIPELINER® 200D KUBOTA
