NEC NDA-24298 manual General

ALRNN : Assignment of Logical Route and Route Class Data for NDM

ALRNN: Assignment of Logical Route and Route Class Data for NDM

1.General

As the functions of ALRTN, ARTD and ARTDN commands are combined into this command, it can be used to allocate the Logical Route number and to assign/delete Route Class data at the same time. The data assigned by this command is written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).

2.Precautions

1.This command can be used only when logging in to NCN.

2.When Route Class Data is assigned to NDM, the data is also assigned to FPC designated node.

3.In case of data deletion by this command, Route Class Data of both NDM and FPC designated node are deleted.

As the DM data set by ARTD command is also deleted in this process, when you want to delete the allocated Logical Route Number only, use ALRTN command.

3.Data Entry Instructions

See data sheet in Section 4.

NDA-24298CHAPTER 4

Page 553

Issue 1