NEC NDA-24298 manual Day/Night Connection Restriction

ASYD : Assignment of System Data

	SYSTEM		BIT
SYSTEM		DATA	CORRESPONDING
	DATA
DATA		(DATA)	DATA
	INDEX				SYSTEM DATA CONTENTS
TYPE		00 – FF
(SYS)	(INDEX)	(Hex)	DATA
	0 – 511			BIT
			0/1
				b0	Tenant Restriction Class Data (ATNR
					command)	Separate or Common
						Tenant Data table de-
				b1	EPN Facility Restriction Data (AEFR
					command)	velopment for the re-
						spective commands
				b2	Primary Call Restriction Data (APCR
						0/1 = Separate/Com-
					command)
						mon
				b3	Authorization Code Data (AATC
					command)	Note: When data
	94			b4	Special Access Code for Floor Data	“1” is
					(ASPF command) (for Hotel System)	assigned,
						data must be
					Day/Night Connection Restriction
						assigned for
				b5	Data (ADNR command) (for Hotel
						Tenant 1
					System)
						(TN = 1) in
					Station-to-Station Connection
						the respective
1				b6	Restriction Data (ASCR command)	commands.
					(for Hotel System)
				b7	Special Incoming Data (ASID com-
					mand)
				b0	When billing data output failure has	Data can be saved from
					occurred to SMDR/RS-232C, the unit	10 to 990 minutes (16
				b1
					digit of the time in which the billing	hours) by 10-minute
				b2
					data can be saved; 0-9 (10-minute	basis.
				b3	basis)	In the case of 00,
				b4		output billing data can
	95					be saved for 3 hours.
				b5	When billing data output failure has
						In the case of FF,
				b6	occurred to SMDR/RS-232C, the tens
						output billing data can
					digit of the time in which the billing	be saved until data
					data can be saved; 0-9 (10-minute
						output becomes
				b7	basis)
						possible.
						(Default is FF fixed)

CHAPTER 4 NDA-24298

Page 100

Issue 1