NEC NDA-24298 manual Atdpn Assignment of Toll Code Restriction Data for NDM

ATDPN : Assignment of Toll Code Restriction Data for NDM

ATDPN: Assignment of Toll Code Restriction Data for NDM

1.General

This command assigns the area code of Toll Restriction - 3/6 digits for both an outgoing connection and a tandem connection. This data is written in the Network Data Memory (NDM) of the Network Control Node (NCN). The data assigned by this command is used in common within the Fusion Network.

2.Precautions

1.This command is used when restriction data is assigned to RES = 2 (Toll Restriction is required) in the ARSCN command or in the ARRCN command.

2.The office code following the area code assigned on this command can also be specified by the AARPN command.

3.Setting Method of Area and Office Code Restriction

TRK
ACC		TOLL	AREA	OFFICE		STATION
CODE		CODE	CODE	CODE		NUMBER
9	–	1	– NPA –		Nxx –	xxxx

In case the number to be dialed is as shown above.

(a)3-Digit Toll Restriction

9 - 1 - NPA - Nxx - xxxx

A 3-digit toll restriction is a restriction that is to be executed by developing the contents (NPA in this case) of the digits that follow the toll code.

If the data is set as follows, a toll call can be restricted by developing NPA.

•At Toll Code Restriction Data (ATDPN) DC = 9-1, TDI = 2, NND = 3 (NPA)

•At Area & Office Code Data (AARPN) DC = NPA (Only 3 digits)

(b)6-Digit Toll Restriction

9 - 1 - NPA - Nxx - xxxx

A 6-digit toll restriction is a restriction that is to be executed by developing the contents (NPA - Nxx in this case) of the 6 digits that follow the toll code.

NDA-24298CHAPTER 4

Page 379

Issue 1