NEC NDA-24298 manual Activated, Timer Value elapses once again, Automatic Cancel is

ASYD : Assignment of System Data

b6		0		1
Parameter DR assigned via	0	1	0	1
command “ARTD”

Direct-In Termination (DIT)				Ringer Pattern 1		Ringer Pattern 0	Ringer Pattern 1	Ringer Pattern 0
Via Attendant Console				Ringer Pattern 1		Ringer Pattern 0	Ringer Pattern 1	Ringer Pattern 1
Via other station				Ringer Pattern 1		Ringer Pattern 0	Ringer Pattern 1	Ringer Pattern 1
Interoffice call				Ringer Pattern 1		Ringer Pattern 1	Ringer Pattern 1	Ringer Pattern 1
	SYSTEM			BIT
SYSTEM			DATA	CORRESPONDING
	DATA
DATA			(DATA)	DATA
	INDEX					SYSTEM DATA CONTENTS
TYPE			00 – FF
(SYS)	(INDEX)		(Hex)	DATA
	0	– 511			BIT
				0/1
					b0	Cancel Timer for an Unanswered Radio Page
					b1	Time Counter (TC) is assigned a value from 0 Hex to F Hex (0
						–15).
					b2
						Timer Value is (TC+1) ⋅ 30 sec.
					b3
						Note: If the set Timer Value elapses, Automatic Cancel is
						activated.
1		74
					b4	Recall and Cancel Timer for an Unanswered Radio Page
					b5	Timer Counter (TC) is assigned a value from 0 Hex to F Hex (0
						– 15).
					b6
						Timer Value is (TC+1) ⋅ 30 sec.
					b7	Note: If the set Timer Value elapses, Recall is activated. If the
						Timer Value elapses once again, Automatic Cancel is
						activated.

CHAPTER 4 NDA-24298

Page 90

Issue 1