NEC NDA-24298 manual Arnp Assignment of Reverse Numbering Plan Data

ARNP : Assignment of Reverse Numbering Plan Data

ARNP: Assignment of Reverse Numbering Plan Data

1.General

This command assigns the access code for each individual route in accordance with the ARTD command.

2.Precautions

1.The ARNP command assignment is required in either of the following cases:

(a)ASPA command SRV = LCR or SRV = LCRS

(b)ARTD command SMDR = 1 (SMDR is provided)

2.The reversed number (ACC) assigned in this command is output to the SMDR as an access code for the originating call.

3.The one access code can be entered to different routes; however, multiple access codes cannot be entered to one route.

4.If Centralized Billing-CCIS, Call Back-CCIS, and Calling/Called Number Display-CCIS service is provided in the Open Numbering Network, the following data should be assigned:

RT = 0

ACC = The Office Code of the self office (including ACC for the orginating call)

5.When programming the reverse numbering plan data for ISDN/CCIS, assign the B-channel/voice channel trunk route in the RT parameter.

NDA-24298CHAPTER 4

Page 267

Issue 1