NEC NDA-24298 manual Andd Assignment of Name Display Data

ANDD : Assignment of Name Display Data

ANDD: Assignment of Name Display Data

1.General

This command assigns user information (user’s name) onto a Station to program the Name Display - System service feature.

2.Precautions

1.The Name Display - System service feature allows a Dterm with LCD to show the user information that corresponds to the calling station number while it is engaged in a station-to-station call.

2.The following must be set in the ASYD command SYS1, INDEX78, b5 = 1 (Name Display service).

3.The number of digits to be assigned to the parameter NAME is determined by ASYD command, SYS1, INDEX241, b1=0/1: 8 characters/16 characters. Multi-Line service is not available if “16 characters” is selected.

4.This command cannot be used for Name Display - OAI service.

5.The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8.

3. Data Entry Instructions

TENANT	STATION NUMBER
NUMBER		(STN)
(TN)

NAME

Enter desired alphanumeric character.

		IDENTIFYING
	INFORMATION		REMARKS
		(NAME)
8 or 16 CHARACTERS

NDA-24298CHAPTER 4

Page 427

Issue 1