NEC NDA-24298 manual B0, b1, B3 b7

ASYD : Assignment of System Data

								BIT
SYSTEM		TENANT	SYSTEM			DATA	CORRESPONDING
DATA		NUMBER	DATA			(DATA)		DATA		SYSTEM DATA CONTENTS
TYPE		(TN)	INDEX			00 - FF
(SYS)		0 - 63	(INDEX)			(Hex)	DATA		BIT
							0/1
									b0	Call Back and OG Trunk Queuing Access Code	Note
										0/1 = Separate/Common
										Automatic setting of OG Trunk Queuing service	Note
									b1	When receiving BT, OG Trunk Queuing is set automatically
										by going on-hook.
										0/1 = Not Required/Required
			4						b2	Off-Hook Queuing service for Attendant Console
										0/1 = Out/In Service
							0		b3
							0		b4
2							0		b5	Not used
							0		b6
							0		b7
							0		b0, b1	Not used
										When the destination station is busy, Call Back is
										automatically set after the operating station is released from
										the connection in Call Transfer - All Calls procedure.
			5						b2	0 = Recall to the mediate station
										1 = Camp On Service is set
										Note: Available for software Release 9 or later.
							0		b3 - b7	Not used
	SYSTEM				TN
IPX				1 ~ 63

Note: When data “1” is assigned, either SID = 3 or 19 may be assigned via command ASPA.

CHAPTER 4 NDA-24298

Page 160

Issue 1