NEC NDA-24298 manual Ani, Srv

ARTIN : Assignment of Trunk Application Data for NDM

CDN			LOGICAL ROUTE NUMBER (1-899)
	TRUNK DATA
31	ANI	Timing to demand ANI Information
		0	= There is no ANI demand at Incoming call
		1	= After receiving 1st digit
		2	= After receiving 2nd digit
		3	= After receiving 3rd digit
		4	= After receiving 4th digit
		5	= After receiving 5th digit
		6	= After receiving 6th digit
		7	= After receiving 7th digit
32	SRV	(Australia only)
		Additional Service Selection
		bit 0 = Advice of Charge (AOC)
		0	= Valid	1 = Invalid
		bit 1 = Malicious Call Trace (MCT)/Malicious
		Call Identification (MCID)
		0	= Valid	1 = Invalid
		bit2-bit6 = Not used
		bit7 = For TON and/or NPI
		0	= Invalid	1= Valid

Note: Input this data by a decimal.

33 TON	Type of Number
	0	= Unknown
	1	= International Number
	2	= National Number
	3	= Network Special Number
	4	= Subscriber Number	5 = Not used
	6	= Abbreviated Number
	7	= Reserved for Extension

	Note:		This data is effective	when
			ARTD, INT = 4 and SRV bit7
			= 1 is assigned.
34 NPI	Numbering Plan Identification
	0	= Unknown
	1	= ISDN/Telephony Numbering Plan
	2	= Not used
	3	= Data Numbering Plan
	4	= Telex Numbering Plan
	5-7 = Not used
	8	= National Standard Numbering Plan
	9	= Private Numbering Plan
	10-14 = Not used
	15 = Reserved for Extension
	Others = Not used
	Note:		This data is effective	when
			ARTD, INT = 4 and SRV bit7
			= 1 is assigned.

CHAPTER 4 NDA-24298

Page 656

Issue 1