Warning Messages
Message | Cause | Corrective action | Page |
| Displayed when the lamp control | • Arrange for a new lamp (lamp | 44, 46 |
| setting is set to LIGHT OUTPUT | unit) or replace the lamp early. |
|
| CONTROL MODE (LOC) or LIGHT |
|
|
| POWER CONTROL MODE (LPC) |
|
|
1000 h | and the lamp use time display is |
|
|
Lamp replacement | turned [ON] with the OSD menu |
|
|
• Displayed when the lamp use |
|
| |
EXIT |
|
| |
time exceeds 1000 hours. |
|
| |
|
|
|
*The message does not appear if the lamp use time display is turned [OFF] with the OSD menu.
| Displayed when the lamp control | • Arrange for a new lamp (lamp | 44, 46 |
| setting is set to LIGHT OUTPUT | unit) or replace the lamp early. |
|
| CONTROL MODE (LOC) or LIGHT |
|
|
| POWER CONTROL MODE (LPC) |
|
|
| • Appears every time the projector |
|
|
Lamp replacement | is turned on after the lamp use |
|
|
time has exceeded 1900 hours |
|
| |
EXIT |
|
| |
and until it reaches 2000 hours. |
|
| |
|
|
|
*The message is cleared by pressing any button.
| Displayed when the lamp control | • Replace with a new lamp (lamp | 44, 46 |
| setting is set to LIGHT OUTPUT | unit) and reset the lamp use time. |
|
| CONTROL MODE (LOC) or LIGHT |
|
|
| POWER CONTROL MODE (LPC) |
|
|
Warning | • When the lamp use time reaches |
|
|
Lamp replacement | 2000 hours, the word “Warning” |
|
|
EXIT | blinks on the screen. |
|
|
|
|
|
*To cancel this message, press the EXIT button.
However, the same message will appear every hour.
*If the power is turned off after the lamp use time has exceeded 2000 hours, the power can not be turned on again.
*When the lamp use time reaches 2010 hours, the projector is forcibly turned off and can not be turned back on again.
Memo |
The message display language corresponds to the menu display language setting. This is set to “English (English)” when the projector is bought. The display language can be selected from 6 languages. (Refer to page 46.) However, the input mode (PC1, PC2, DVI, Y/C, VIDEO, COMP) and button indications (FREEZE, D.ZOOM, EXIT) are only displayed in English irrespective of the display language setting.
The language settings in the section are explained in “English”.
68
