Meridian Audio FDP-DILA2 warranty Loosen the two screws with a flat-endscrewdriver

Replacing the Light-Source Lamp

■Be sure that the power cord is unplugged from the wall outlet.

1 Remove the lamp-replacement opening cover by loosening screws.

Loosen the two screws with a flat-end screwdriver.

Note

Screw

•The screws are fitted so that they do not come off the lamp- replacement opening cover.

Lamp-replacement opening cover

Be careful not to damage the claw.

2 Loosen the screws, raise the handle, and pull out the light-source lamp.

Loosen the two screws with a flat-end screwdriver. Screw

Note

• The screws are fitted so that they do not come off the light- source lamp.

Light-source lamp

Handle

(To be continued on the next page)

59