Menu Operations
Basic Menu Operation
When the MENU button is pressed, the projector enters Video or PC menu mode by responding to the input signal being received.
Video menu mode:
Enters this mode when
•Video devices connected to the VIDEO IN (Y/C, VIDEO and COMP) terminals.
PC menu mode:
4Press the cursor button 5 or ∞ to
select an item in the submenu.
When a “Language” has been selected in step 2, press to set the language.
Remote control unit | Projector |
Enters this mode when
•A computer connected to the PC 1 terminal.
•A computer connected to the PC 2 terminal, which outputs analog RGB, V, H/Cs signals.
•A computer connected to the DVI terminal.
1Press the MENU button.
The main menu is displayed on the screen.
Remote control unit | Projector |
MENU | MENU |
2Press the cursor button 5 or ∞ to select an item in the main menu.
Remote control unit | Projector |
3Press the cursor button 3 or the
ENTER button to enter the submenu.
The submenu corresponding to the item selected in step 2 is displayed on the screen.
*When you selected “Information” in step 2, no submenu is available.
Remote control unit | Projector |
5Press the cursor button 2 or 3 to set
or adjust the value.
Remote control unit | Projector |
When an item which has the “ENTER” message has been selected in step 4, press the ENTER button to move to the next submenu.
•All reset → (Refer to page 49)
•Position → (Refer to page 51)
•Decoder → (Refer to page 45)
•Keystone → (Refer to page 54)
•Page 1 → (Refer to page 54)
•Page 2 → (Refer to page 54)
To exit the main menu:
•While the main menu is displayed, press the MENU button. The main menu disappears and the original picture image resumes.
To exit the submenu:
•While the submenu is displayed, press the EXIT button. The menu returns to the previous menu.
•To exit the menu mode directly, press the MENU button. The submenu disappears and the original video image is restored.
42
