Meridian Audio FDP-DILA2 Controls and Features, 1PC computer 1 input terminal D-sub 3-row15 pin

Controls and Features

Connector Panel

	4	5
1	R	Y		6
			Y/C
	G	PB/B-Y
			VIDEO	7
	B	PR/R-Y
2
			REMOTE	8
	H
	V
3	IN			9
		IN	OUT

1PC (computer) 1 input terminal (D-sub 3-row 15 pin)

This is an input terminal dedicated to computer signals (RGB video signals and sync signals).

Connect the display output terminal of the computer to this terminal. When a Macintosh computer is to be connected, use the supplied conversion adapter for Mac.

Note

•When computer-related signals are input, the uppermost edge of the image may appear to bow if the sync signal input is composite sync (Cs) or G on sync signal. In this case, use separate sync signals for vertical sync (V) and horizontal sync (H).

2PC (computer) OUT terminal (D-sub3-row 15 pin) This is the terminal for video output from the monitor of the computer connected to PC1 or PC2.

The computer input signal projected on the screen is output. A display monitor can be used by connecting it to this terminal.

3DVI terminal [DVI-D 24 pin]

This is the digital RGBHV input terminal.

• Connect Video Processor here.

4 PC (computer) 2 input terminals (BNC ⋅ 5)

These are multipurpose video input terminals that allow

input of the following signals.

• Analog RGB signals, vertical sync (V) signals, and

horizontal sync (H) signals / composite signals (Cs).

(Devices which have analog RGB signal output

terminals can be connected.)

* Input of external sync signals is automatically detected.

Detection of H/V signals or Cs signals causes automatic

switching to external sync. The priority order is H/V > Cs.

Note

• When computer-related signals are input, the uppermost

edge of the image may appear to bow if the sync signal

input is composite sync (Cs) or G on sync signal. In this

case, use separate sync signals for vertical sync (V) and

horizontal sync (H).

5Component terminal

Component signals (Y, B-Y, R-Y) or DTV-format (Y, PB, PR) signals. (Devices which have component output terminals can be connected.)

* Connect 480i/480p Component sources to Video Processor, YPrPb HDTV sources can connect directly here.

6Y/C (S-video) input terminal (Mini DIN 4 pin) Connect S-videosources to the Video Processor.

7VIDEO (composite video) input terminal (BNC) Connect Video to the Video Processor.

8REMOTE terminal (stereo mini jack)

Connect an infrared remote control extension unit, etc. to this jack.

Attach the ferrite core (accessory) to the cable which is connected to the REMOTE terminal. (Refer to page 29.)

* For details, consult your dealer.

9RS-232C CONTROL terminal IN/OUT (D-sub 9 pin) This is the RS-232C interface-specified terminal. The projector can be controlled by a computer connected externally.

* For details, refer to page 27 and 74.

11