Meridian Audio FDP-DILA2 warranty Installing the Projector, Precautions for Installation, Cautions

Installing the Projector

Precautions for Installation

CAUTIONS

1.Before installation, do not connect the projector’s power cord.

2.Do not install the projector in the following places:

•Where there is water, humidity or dust.

•Where the projector may be subjected to oil, smoke or cigarette smoke.

•On a soft surface such as a carpet or cushion.

•Where the projector may be subjected to direct sunlight.

•Where temperature is high or humidity is low.

Allowable operation temperature range: 41°F to 95°F (+5°C to +35°C)

Allowable relative humidity range: 20% to 80% (no condensation)

Allowable storage temperature range: 14°F to 140°F (–10°C to +60°C)

■When installing the projector, observe the following:

•Do not use the projector placed on its side.

Avoid using the projector placed on its side. This could cause a malfunction.

•Use the projector within the specified angle.

Do not use the projector inclined ±30° horizontally (left/right). This could cause color variation or shorten the lamp life.

•Do not block the exhaust vents.

Do not use a cover which encloses the projector air-tight or blocks the exhaust vents. Allow sufficient space around the projector. When the projector is enclosed in a space of the following dimensions, use an air conditioner so the temperature inside becomes equal to the outside temperature.

Allowable minimum space required

300mm

200mm

600mm

300mm

200mm

15