Basic Operations
■Projector’s buttons
3. Adjust the Screen Size (Zooming)
PRESET button
| STAND BY |
LAMP | TEMP |
| OPERATE |
HIDE | |
| PC |
KEYSTONE |
|
| VIDEO |
PRESET | MENU |
How to adjust the projected screen size differs depending on the lens unit (optional) you are using.
The projected screen size cannot be changed.
Adjust the projected screen size with the following buttons on the remote control unit.
EXIT button
EXIT | ENTER |
Note |
•The function of
■Remote control unit
To enlarge the projected screen size
Press the ZOOM W (Wide) button.
To reduce the screen size
Press the ZOOM T (Tele) button.
Remote control unit | T |
DIGITAL
ZOOM
SCREEN W/S button
FOCUS +/– button ZOOM T/W button
PRESET button
EXIT button
QUICK
ALIGN.OPERATE
HIDE
W
SCREEN FREEZE COMP VIDEO
S
PC1 PC2 DVI Y/C
T | T |
KEYSTONE DIGITAL ZOOM FOCUS ZOOM
W W
PRESETMENU
EXITENTER
W
4. Adjust Focus
Adjust focus with the following buttons on the remote control unit.
To focus on farther points:
Press the FOCUS + button.
To focus on nearer points:
Press the FOCUS – button.
Remote control unit
FOCUS
Note: for proper operation with the Video Processor and anamorphic lens, the projector should stay in the 4:3 mode. Aspect ratio control
is operated with the Video Processor. Aspect ratio control for HDTV pass
5. Setting the Screen Aspect Ratio
Set in accordance with the screen aspect ratio that will be used. When a screen aspect ratio of 16:9 is used, a 4:3 image can be projected within the screen without using the zoom function.
When using a 16:9 screen:
Press the “W” button.
When using a 4:3 screen:
Press the “S” button.
Remote control unit | W |
|
SCREEN
S
*There is no button on the unit.
*This setting can also be performed from the menu. (Refer to page 46.)
• When using a screen with a 16:9 aspect ratio
When set to “S” (4:3)
*If a 4:3 image is projected, some parts of the top and bottom of the image may not be displayed.
When set to “W” (16:9)
*A 4:3 image will be displayed in full in the middle of the screen.
33
