Connecting to Various Devices
Connecting the Power Cord
After all devices have been finished being connected, connect the supplied power cord. At this time, do not yet turn on the MAIN POWER switch.
Power cord (supplied)
CAUTIONS
To prevent fire and electric shock, observe the following:
•When you do not use devices, pull out their power cords from wall outlets.
•Do not connect the devices with power cords other than those supplied.
•Do not use mains voltage other than the power voltage indicated.
•Do not scar, damage, or work on the power cords. Also, do not put a heavy object on, heat, or stretch the power cords, otherwise they may be damaged.
•Do not insert or pull out the plugs with a wet hand.
1Insert the supplied power cord into the power input terminal of the projector.
Ferrite core
2Insert the main plug of the supplied power cord into a suitable wall outlet.
CAUTIONS
• Since the power requirement of the projector is high, insert
for European continent countries
the power plug directly into a wall outlet.
•Use the supplied power cord with the ferrite core only.
•Do not remove the ferrite core from the supplied power cord; Otherwise, there may be a possibility that a harmful interference occurs.
29
