Resetting the Lamp Use Time, Or more | Meridian Audio FDP-DILA2

■Resetting the Lamp Use Time

Replacing the Light-Source Lamp

■Resetting the Lamp Use Time

After replacing with a new light-source lamp, reset the lamp-time counter inside the projector to clear the accumulated lamp time to zero (0). After resetting, a new count will start for the new light-source lamp.

■Projector’s button

STAND BY

LAMP TEMP

OPERATE

4 HIDE	HIDE
button		PC
		PC
	KEYSTONE
		VIDEO
	PRESET	MENU
3 EXIT
button	EXIT	ENTER

Cursor buttons 5/∞

STAND BY indicator

OPERATE indicator

1PC button

MENU button

2ENTER button

1Turn on the MAIN POWER switch to go

into stand-by mode.

In stand-by mode, the STAND BY indicator on the projector lights up.

2Press the following buttons on the projector, sequentially.

1Momentary press the PC button.

2Momentary press the ENTER button.

3Momentary press the EXIT button.

4Press and hold the HIDE button for two seconds

or more.

*During this sequence, the STAND BY and OPERATE indicators alternately blink about every approx. 3 seconds. After completion of the sequence, the STAND BY indicator alone stays on.

*Buttons must be pressed within 2 seconds of the previous button.

*When you make a mistake in button operations, return to the beginning of the sequence.

*To check the lamp time on the menu, press the MENU button and select “Information” with the cursor button 5 or ∞.

The lamp use time is indicated in the item “Lamp time”.

Video main menu

Menu

Image adj. Setting Color temp. Options Language

Information

Input	VIDEO
Switcher	CH.0
Source	NTSC
Lamp time	123 h

Lamp time (0 h)

PC main menu

Menu

Image adj. Setting Color temp. Options Language

Information

Input	PC 1
Switcher	CH.0
Resolution 1280 1024
Frequency H	79.9	kHz
Frequency V	75	Hz
Lamp time	123	h

Lamp time (0 h)

CAUTION

•Reset the lamp use time only when you have replaced with a new light-source lamp. Never reset it during lamp life, otherwise the replacement time may become unclear, and lead to degraded performance or lamp explosion.

61

Image 61

Meridian Audio FDP-DILA2 Resetting the Lamp Use Time, Projector’s button, 1Turn on the MAIN POWER switch to go, or more

Contents

Home Theater Optimized Installation and Operations ManualFDP-DILA2 IMPORTANT INFORMATION IMPORTANT SAFEGUARDS SAFETY PRECAUTIONSAbout the installation place About burning-inof the D-ILAdevice Power cord Contents for checking operation Accessoriesfor Macintosh 3AC IN power input terminal Controls and Features5MAIN POWER switch 1Exhaust vents pConnector panel Controls and FeatureswAir inlet eControl panel t y u Controls and FeaturestAir inlet filter yOpening for replacing the light-sourcelamp Control Panel on the Projector pPRESET button Controls and FeatureseLAMP indicator rTEMP indicator 1PC computer 1 input terminal D-sub 3-row15 pin Controls and Features3DVI terminal DVI-D24 pin 4 PC computer 2 input terminals BNC ⋅ Remote Control Unit rDIGITAL ZOOM T/W buttons Controls and FeaturestPC buttons ySCREEN W/S buttons Precautions for using batteries Install the batteriesControls and Features Open the back cover Precautions for Installation Installing the ProjectorCAUTIONS Adjusting the vertical angle of the projector Adjusting the Inclination of the ProjectorInstalling the Projector Leveling the projector Installing the Projector Installing the Projector against the ScreenSide view Top view Projection Distance and Screen Size Installing the ProjectorOptional Lenses 2Loosen the SHIFT LOCK fixing bolt Installing the Projectorscreen 4Tighten the SHIFT LOCK fixing bolt firmly Installing the Projector Using as a wireless remote control unit Installing the Projector When installing adjusting/setting the unitCAUTIONS Video signals Connecting to Various DevicesComputer signals Note: Instructions for installing the Video Connecting to Various Devices Allowable input signals Connecting to Various Devices Connecting to Video DevicesMemo Connecting to Various Devices Connecting to HDTV Devices/DVD PlayersMemo Connecting to Various Devices Connecting to Devices which Control the Projector Connecting to Various Devices Connecting to Computer DevicesConnection to an IBM PC or IBM-compatiblecomputer 1Release the stopper at each end and Connecting to Various Devicesopen the ferrite core 2 Wind the cord around the ferrite core Connecting the Power Cord Lamp control settings Basic Operations 1 Turn on the MAIN POWER switch 1. Turning on the PowerRemote control unit Turning off the Power Remote control unit Remote control unitRemote control unit Projector’s buttons Remote control unit 3. Adjust the Screen Size Zooming4. Adjust Focus 5. Setting the Screen Aspect Ratio Projector’s buttons Remote control unitTurning off Image HIDE Removing the Trapezoidal Distortion of the Image Quick Alignment Function QUICK ALIGN Remote control unitBasic Operations Displaying a Still Picture FREEZE Remote control unitZooming a Part of the Image DIGITAL ZOOM T/W Basic Operations Menu Transition Diagram in No signal Menu Mode Menu OperationsQuick Reference Guide for No signal Menu Mode Menu Operations Menu Transition Diagram in Video Menu Mode Menu Operations Quick Reference Guide for Video Menu ModeFactory set value Menu Operations Menu Transition Diagram in PC Menu Mode Menu Operations Quick Reference Guide for PC Menu Mode 4Press the cursor button 5 or ∞ to or adjust the valueselect an item in the submenu 1Press the MENU button Projector Remote control unitVideo menu mode PC menu mode 1Press the MENU button Changing the Color System Video Menu Mode Only 1Press the MENU button Changing the Language Display3Set the language with the cursor button 5 or ∞ 1Press the MENU button Adjust the tracking or phase with the cursor 2 or Adjusting Tracking/Phase1Press the MENU button Menu Operations 1Press the MENU button To perform All Reset Make adjustment with the cursor 2 orHowever, some fine-tuningfor specific installations may be required To perform All Reset Adjusting Color temperature1Press the MENU button button 1Press the MENU button Adjusting the Video Screen/Menu Positionmenu 1Press the MENU button 1Press the MENU button Make adjustment with the cursor 2 or Setting and Adjusting Other Functions OPTIONS1Press the MENU button Menu Operations Menu Operations 1Press the MENU button Getting Information3Press the MENU button to exit the menu mode Menu Operations 5Reinstall the fuse holder into the projector Replacing the Fusethe projector and the wall outlet 2Loosen the fuse holder to remove it Light-sourcelamp and lamp use time Replacing the Light-SourceLamp CAUTIONS Replacing the Light-SourceLamp Loosen the two screws with a flat-endscrewdriver 5Reset the lamp use time 4Replace the lamp-replacementopening3 Insert the new light-sourcelamp fully inside and fasten the screws 1Turn on the MAIN POWER switch to go Resetting the Lamp Use TimeProjector’s button into stand-bymode 1Turn off the MAIN POWER switch Cleaning and Replacing the Filter Cover3Clean the filter 4Reinstall the filter Troubleshooting Troubleshooting Maintenance Action to be taken for warning indication Warning Indication Message Warning MessagesCause Corrective action Warning Messages Warning Messages Displayed when the lamp controlMemo Optical mechanism system SpecificationsElectrical system Input terminals General Specifications Front SpecificationsSide 22.430 Y/C terminal SpecificationsRS-232Cterminal PC1 terminal/PC OUT terminal 1. Communication Specifications RS-232Cexternal control2. Command Format 2-3Parameters used for the data format 3. Control command tableRS-232Cexternal control 1 Numeric value For lens unit GL-M2910G1 AppendixFor lens unit GL-M2915SG1.5 For lens unit GL-M2920ZG2 to AppendixFor lens unit GL-M2930SZG2.9 to Page Page Page LIMITED WARRANTY WARRANTYFaroudja Laboratories A Division of Genesis Microchip Corp