Meridian Audio FDP-DILA2 warranty 1Press the MENU button, Make adjustment with the cursor 2 or

Menu Operations

Adjusting Picture Quality

In the “Image adj.” submenu, adjust brightness, contrast, sharpness, etc. to obtain the desired picture quality. Note that the adjustment items differ in Video menu mode and PC menu mode.

1Press the MENU button.

The main menu appears on the screen.

2Select “Image adj.” with the cursor button 5 or ∞, and press 3 or the ENTER button.

The “Image adj.” submenu appears on the screen.

Video submenu

Image adj.

Contrast12

Brightness 12

Color12

Tint12

Sharpness 1

All reset ENTER

PC submenu

Image adj.

Contrast	12
Brightness	12
Sharpness	1	2	3	4	5
All reset	ENTER

3

4

Select the item to be adjusted with the cursor button 5 or ∞.
*“Color” and “Tint” are shown in Video submenu only.
	Note: Levels are pre-aligned at Faroudja.
Make adjustment with the cursor 2 or 3.
	However, some fine-tuning for specific
*To adjust multiple items, repeat 3 and 4.	installations may be required.

Adjustment item	Button			Adjustment content
Contrast	2 or 3	Gets lower/higher. (–30 ↔ 0* ↔ +30)
Brightness	2 or 3	Gets darker/brighter. (–30 ↔ 0* ↔ +30)
Color	2 or 3	Gets softer/deeper. (–30 ↔ 0* ↔ +30)
		(Video menu mode only)
Tint	2 or 3	Gets reddish/greenish. (–30 ↔ 0* ↔ +30)
		(Video menu mode only)
		Gets softer/sharper.
		• Video menu mode: (–5 ↔ 0* ↔ +5)
		• PC menu mode: (1 ↔ 3* ↔ 5)
Sharpness	2 or 3
			Note
		• When in the PC menu mode, if the resize function in the PC submenu is set to
			“1:1”, the image quality will not change even if the value is changed.
All reset	ENTER	Resets above items to the factory set values. How to operate is mentioned below
		(next page).
* : Factory set value

■To perform All Reset

•In the Image adj. submenu, select “All reset” with the cursor button 5 or ∞, and press the ENTER button. Then, the “All reset” submenu appears on the screen.

•Press the cursor button 2 to select “Yes”, and then press the ENTER button.

•All items in the “Image adj.” submenu are reset to the factory set values and the menu returns to the previous one.

To exit the “All reset” submenu without performing All reset, select “No” with the cursor button 3 and, press the ENTER button.

(To be continued on the next page)

48