Meridian Audio FDP-DILA2 warranty Specifications, Optical mechanism system, Electrical system

Specifications

■Optical mechanism system

•Projection method

•D-ILA®device

•Projecting lens

D-ILA®(Direct Drive Image Light Amplifier) method (Reflective-type active-matrix method)

0.9" (2.3 cm) measured diagonally (1365 pixels ⋅ 1024 pixels) ⋅ 3 (Total number of pixels : 4,193,280)

GL-M2910G:	1:1
GL-M2915SG:	1.5:1 (with ±2% zooming/shift function)
GL-M2920ZG:	⋅ 1.5 zoom lens (2:1 to 3:1) (zooming function)
GL-M2930SZG:	⋅ 1.9 zoom lens (2.9 to 5.5:1) (zooming/shift function)

• Screen size	GL-M2910G:
	GL-M2915SG:
	GL-M2920ZG:
	GL-M2930SZG:

Refer to page 76. Refer to page 76. Refer to page 77. Refer to page 77.

• Projection distance	GL-M2910G:
	GL-M2915SG:
	GL-M2920ZG:
	GL-M2930SZG:

Refer to page 76. Refer to page 76. Refer to page 77. Refer to page 77.

• Light-source lamp 420 W xenon lamp

■Electrical system

•	Color system	NTSC, NTSC4.43, PAL (Automatic switching / manual switching)
•	Resolution	1365 dots ⋅ 1024 dots (S-XGA full resolution, during RGB input)
		1000 TV lines (Horizontal resolution, aspect ratio 4 : 3, during video input)
•	Scanning frequency	Horizontal frequency	: 15 kHz ~ 105 kHz
		Vertical frequency	: 50 Hz ~ 100 Hz
•	Audio power output	1 W (monaural), 1-5/8" (4 cm) round type micro-speaker ⋅ 1

■Input terminals

[AV IN]
•	Y/C	1-line, mini-DIN 4 pin ⋅ 1 (for S-video)
•	VIDEO	1-line, BNC ⋅ 1 (for composite video)
		1-line, BNC ⋅ 3 (for computer, DTV or video)
•	Y, B-Y, R-Y	Component (Y, B-Y, R-Y) signal
•	Y, PB, PR	DTV-format (Y, PB, PR) signal
[PC 1]
• R, G, B, H, V		1-line, D-sub 3-row 15 pin ⋅ 1 (for computer)
[PC 2]
		1-line, BNC ⋅ 5 (for computer, DTV or video)
•	R, B, G	Analog RGB signal
• H/Cs, V		Horizontal (H) sync/composite (CS) sync, Vertical (V) sync signal
[DVI]		1-line, DVI-D 24-pin ⋅ 1
[CONTROL]
•	RS-232C	1-line, D-sub 9-pin ⋅ 1

*RS-232C-interface specified control terminal for controlling this projector with a personal computer.

• REMOTE	1-line, stereo mini-jack ⋅ 1
	* Remote terminal for connecting with the remote control unit.

■Output terminal

•	PC OUT	1-line, D-sub 3-row 15-pin ⋅ 1 (output for display monitor)
•	CONTROL OUT	1-line, D-sub 9-pin ⋅ 1

*RS-232C-interface specified control terminal for controlling this projector with a personal computer.

69