NEC NDA-24298 manual Data Mdata System

ASYDN : Assignment of System Data in Network Data Memory

3. Data Entry Instructions

MDATA

The MDATA parameter designates whether your input data in the parameter DATA is valid or not in the Fusion network. Each bit of MDATA is determined as “1” for valid, “0” for invalid. Then, convert it to Hex. to enter the data in the parameter MDATA.

BIT	b7	b6	b5	b4	b3	b2	b1	b0
DATA	0	0	0	1	0	0	0	0	EX. When “10 Hex.” is entered in
Hex									the parameter DATA and “90
			1				0		Hex.” is entered in the parameter
									MDATA, both bit4 data and bit7
									data affect the Fusion network.
									(Both “One digit dialing” service
BIT	b7	b6	b5	b4	b3	b2	b1	b0	and “Warning tone” service are
									valid in the Fusion network..
DATA	1	0	0	1	0	0	0	0
(MDATA)			9				0

SYSTEM	SYSTEM	DATA	BIT CORRE-
			SPONDING
DATA	DATA	(DATA)
			DATA
TYPE	INDEX	00-FF
(SYS)	(INDEX)	(Hex) DATA		BIT
	0-1535		0/1
			0	b0
			0	b1
			0	b2
			0	b3
1	70	10	1	b4
			0	b5
			0	b6
			0	b7

SYSTEM DATA CONTENTS

Not used

Not used

Not used

Not used

One digit dialing (DP Tel) 0/1 = Out of service/In service

Not used

Not used

Warning Tone for Executive Right of way 0/1 = Required/Not required

(MDATA) 00-FF (Hex)

90

DATA	BIT
0	b0
0	b1
0	b2

0b3

1b4

0	b5
0	b6

0b7

DATA

Convert from Binary to Hexadecimal, and enter the Hex. value in the parameter DATA.

BIT	b7	b6	b5	b4	b3	b2	b1	b0
DATA	0	0	0	1	0	0	0	0
Hex			1				0

NDA-24298CHAPTER 4

Page 905

Issue 1