NEC NDA-24298 manual Aadc Assignment of Additional Digit Translation Data, Pnl, 999

AADC : Assignment of Additional Digit Translation Data

AADC: Assignment of Additional Digit Translation Data

1.General

This command assigns additional digit information for Least Cost Routing (LCR).

2.Precautions

1.Before using this command, confirm that a Pattern Number Location (PNL) has been assigned in the AOPR command.

2.The applicable number of additional digit (DC) varies depending on the PNL data assigned by the AOPR/ AUNE command. When the AOPR command is assigned, and additional digit is sent to outside of the Node, a maximum of 4 digits of DC is available when the PNL is assigned with a range from 1 to 127, and a maximum of 24 digits of DC is available when the PNL is assigned with a range from 128 to 999. When the AUNE command is assigned, a maximum of 4 digits of DC is available.

3.Data Entry Instructions

PNL

Enter the PNL assigned by theAOPR command with a range 1-999, or by the AUNE command with a range 1-127.

PATTERN NUMBER		ADDITIONAL DIGIT INFORMATION
LOCATION		(DC)	REMARKS
	(PNL)	MAX. 24 DIGITS
1-999

DC

Enter DC additional numbers (not including the access code for LCR) to be applied to the transmitted number.

NDA-24298CHAPTER 4

Page 321

Issue 1