NEC NDA-24298 Oid, Tks, PAD2, Trm, Trpx, Ldr, Tsc, Sats, Rvpx, Slov, Sdto, Advpra, Ind, Uui, Cmrt

ARTD : Assignment of Route Class Data

							RT					REMARKS
FUNCTION
		ISDN transmitting information
			0 = Out of Service
98	CI		1 = 16-Digit Caller Number Service, Attribute
				Information Notification Service, and Calling Sub-
				Address Transfer Service
		2-15= Not used
99	OID							0	0	0	0	Always assign data “0."
100	TKS							0	0	0	0	Always assign data “0."
		Pad Control Data 2										PAD value can also be
												set by switch setting on
101	PAD2	0-7 = For Pad value, See the NEAX2400 IPX Circuit Card
												the 8TLT (Long Line
		Manual.
												Telephone = TELT) card.
102	TRM							0	0	0	0	Always assign data “0."
103	TRPX							0	0	0	0	Always assign data “0."
104	LDR							0	0	0	0	Always assign data “0."
105	TSC							0	0	0	0	Always assign data “0."
106	SATS							0	0	0	0	Always assign data “0."
107	RVPX							0	0	0	0	Always assign data “0."
108	DQ							0	0	0	0	Always assign data “0."
109	SLOV	Slumber Time Override Service
		0	=	Out of Service	1	=	In Service
		System message automatic output when Connection
110	SDTO	Acknowledge signal has not been received.
		0	=	Out of Service	1	=	In Service
111	ADVPRA	ISDN PRI Failure Routing Service										This data is valid for
		0	=	Out of Service	1	=	In Service					dummy routes.
112	IND	Inter-office Name Display
		0	=	Out of Service	1	=	In Service
113	UUI	Information notification between the users
		0	=	Out of Service	1	=	In Service
114	DCH							0	0	0	0	Always assign data “0."
115	CMRT	Common use of Route Numbers of ISDN trunks
		0	=	Out of Service	1	=	In Service
116	PREF							0	0	0	0	Always assign data “0."
117	DFS							0	0	0	0	Always assign data “0."
118	BOB	Broad Band					N ⋅ 64K
		0	=	64K	1	=
119	HO1CH							0	0	0	0	Always assign data “0."

CHAPTER 4 NDA-24298

Page 530

Issue 1